Aluminum foil for heat shield, because the heat transfer coefficient of aluminum is very high. That is, it transmits a lot of heat. The heat transfer rate is high. Of course, there are metals that have higher heat transfer rates. Including copper metal and gold metal. Due to other properties of aluminum, including its economics, aluminum foil is very thin, aluminum foil is the best option. You want to use materials that also transfer heat. If you want to make a shield, you can use aluminum because it reflects a lot of radiant heat, but you need a proper air gap around your pipe.
Insulation does not conduct heat well, so you can place it right on anything you want to insulate, as long as the insulation can withstand the heat. This “guarantees the quality of conductivity.”
However, heat can also be removed by “radiation”. The hot part of the engine, like the exhaust, radiates heat (IR energy). “Thermal protectors” are used to reduce the effect of this radiation on other car parts. Heat shields are parts that do not melt and are placed between the hot part and anything that needs to be protected. There is an air gap between the heat shield and the hot part, so heat is not directed between them. Aluminum foil for heat shield is the most important component of these parts.
Aluminium Hezare Sevom Company is a manufacturer of aluminum sheets and foils. Utilizing technical knowledge and practical experiences, this company, while choosing an alloy suitable for the needs of each industry, produces aluminum foil with the highest quality. Due to the unique properties of aluminum foil, we see the following features in these products. Application of aluminum foil thermal sprayer in fuel system, engine frame and other parts;
Exhaust system protection against overheating
Reduce internal noise with exhaust heat
Alloy
1000/3000 / series
